Laser Power Supply for Soldering & Plastic Joining
Laser Power Supply LW-D30
- LW-D30
- Profile mode
- PB Free
- Reduction of thermal damage by partial heating
- Allows to weld unique shape resin
- Easy maintenance, less consumable parts
Advantages
- 3 kinds of output mode
-
- CW, Pulse, Profile waveform output
- Suitable for various kinds of shape and material
- Output profile on LCD panel
-
- Setting value shown in waveform
- Shows tracing output profile
- Easy Operation
-
- Built-in visible guide light to follow the output
- Flexible core diameter
- Compact and High function design
-
- Well designed structure for Automation
- A variety of communication functions
Example of joining
Example of Plastic joining
Example of Soldering
- Solder bump
- Covered wire
- FPC
- Chip resistor
- Coil
- DIP parts
- Solar battery
- HDD parts
Solder feeder Unit
- Image of Soldering
Accessory
Coaxial CCD Camera Unit L101
- Coaxial CCD Camera Unit L101
This camera unit can see the object from same angle with Laser beam. This unit allows to observe the radiation or teaching position of radiation on work piece.
- Monitor image
Specification
Laser Power Supply LW-D30
| ITEM | Laser Power Supply LW-D30 |
|---|---|
| Laser Max | output 26W(Class 4) |
| Center Wavelength | 980nm(Option:808nm) |
| Core Diameter | 800μm(Option:400μm) |
| Guide Light | Output:1mW or less, wavelength: 635nm( Class 1) |
| LD Cooling System | Air Cool( Peltier contorol) |
| Output Type | CW output Pulse output Profile waveform output( Max 256 point setting) |
| External Control | Analog Voltage control |
| Output Setting Range | Power: 0.0 ~ 26.0W( 0.1W step) Current: 3.0 ~ 56.4A( 0.1A step) |
| Time Setting Range | 0.000~99.999s |
| Display | Laser output value,LD drive current value (Digital display, graphic display) |
| Data Memory | 15 data |
| Interface | RS-232C,I/O |
| Input | AC100V±10%,50/60Hz (OPTION 200V) |
| Dimension | 200(W)×430(D)×280(H)mm |
| Mass | 19kg |
Laser System LW-S100
| ITEM | Laser System LW-S100 |
|---|---|
| Drive Shaft | Servo Motor Drive:X,Y,Z Maximum Moving Speed: 100mm/Sec Maximum Moving Area: X200mm,Y200mm,Z100mm |
| Pressur Method | Air Drive 20 ~ 200N |
| Number of Condition | 16Type |
| Working Distance | ≈80mm(From Top of Lens) |
| Dimensions | 900H×500W×600Dmm |
| Mass | ≈98Kg |
| Input Power Source | AC100V ±10% 50/60Hz 15A |
| Input Air | 0.7MPa |
- LW-S100
- Click the "Contact Us" button on the right.
(for dealer information, sample test or technical consultation)
