PWB repairing equipment
This is the best equipment for repairing fine patterns with transistor type welding power supply.
- This is the device that welds a minute lead wire to the substrate by the parallel gap welding process.
| ELP-696 | |||
|---|---|---|---|
| Welding Electrode | EP-711-00F,02 EP-406-00F,02 |
Heat control | Current10-1800A / Voltage0.01-4V / Power10-3600W |
| Electrode Stroke | Max:19mm | Welding time | UP:0-9.9ms / WELD:0.1-9.9ms / DW:0-9.9ms 0.1ms step |
| Electrode Gap | 0-1mm | Control mode | Constant current,Constant voltage, Constant power |
| Pressure Range | 60-1000g | Welding conditions | 15 |
| PWB Size | Max:630X630mm | Microscope | x 3.5 - 30 |
| Power Source | AC100V±10% 50/60Hz / 15A | ||
| Dimensions / Mass | 760Wx760Dx673H / 60kg | ||
- Click the "Contact Us" button on the right.
(for dealer information, sample test or technical consultation)
